Pooja room door designs in wood, CNC jaali and frosted or etched glass, plus bi-fold, sliding and half doors for small flats, with published 2026 prices, sizes and ventilation.
The most common pooja room door designs are carved or panelled wood, CNC-cut jaali in MDF, wood or metal, and frosted or etched glass in a wooden or aluminium frame, with bi-fold, sliding or half doors where a flat is short of space. Published prices in October 2026 run from about ₹1,500 for a ready-made PVC door, through ₹10,000 to ₹75,000 for most wooden, jaali and glass designs, up to ₹1,50,000 for deep-carved teak or rosewood.
Whichever you choose, the door has one job a bedroom door does not: it closes on a lit diya and incense, so it has to let smoke out.
About the numbers below: prices are market ranges from published sources read on 21 Oct 2026: NoBroker Interiors' glass door guide, Spacewood's and Design Cafe's jaali price guides, and IndiaMART seller listings. Few say whether GST, frame, hardware or fitting are included, so treat them as a starting point for quotes. Sizes are from Houzz India, HomeLane and BIS. "Our guidance" marks MOA's advice, not a standard.
This post is only about the door. For where the mandir goes in a flat and how big the unit should be, see our pooja room design guide for apartments. For direction and placement, see Vastu for the pooja room.
| Door type | Best for | Published price range |
|---|---|---|
| Wooden, panelled or carved | A traditional look, a separate pooja room | ₹10,000 to ₹35,000 a door; deep carving ₹45,000 to ₹1,50,000 |
| CNC jaali (MDF, wood, metal) | Ventilation and a visible shrine | ₹200 to ₹1,500 per sq ft for the panel |
| Frosted, etched or reeded glass | Privacy with light, small flats | ₹10,000 to ₹75,000 a door |
| Bi-fold or sliding | Tight passages and small rooms | ₹18,000 to ₹50,000 a door in glass |
| Half door or gate | Open shrines, homes with children | Priced like a jaali or wooden door of the same area |
| Ready-made PVC | Rentals and tight budgets | ₹1,500 to ₹5,000 a door |
HomeLane notes that wooden engravings are among the most popular pooja door designs in India (HomeLane). The choice is really between three builds:
Listings priced by area range more widely, mostly from ₹260 per sq ft for a 32 mm teak door in Ahmedabad, through ₹650 for a teak door in Agra, to ₹2,800 for a teak door from a handicrafts firm in Kumta. A 3 by 7 ft opening is 21 sq ft, so at ₹650 per sq ft the shutters alone come to about ₹13,650 before frame, hardware, polish and GST (our arithmetic on one seller's rate).
Our guidance: ask for a jaali or louvred panel in the top third, or a solid door turns a small pooja room into a smoke box.
A jaali door does what a solid door cannot: it closes the shrine and still lets air, light and the sight of the diya through. The pattern is usually cut by CNC router or laser, and the material sets the price.
| Jaali material | Published rate per sq ft | Source |
|---|---|---|
| MDF, before lamination or paint | ₹200 to ₹350 | Spacewood |
| MDF, laser-cut | ₹90 to ₹450 | Design Cafe |
| HDHMR | ₹300 to ₹500 | Spacewood |
| PVC or WPC | ₹250 to ₹450 | Spacewood |
| Acrylic | ₹350 to ₹700 | Spacewood |
| Solid teak or sheesham | ₹700 to ₹1,500 and up | Spacewood |
| Metal (MS, steel, corten, brass), powder-coated | ₹500 to ₹1,200 and up | Spacewood |
| Marble | ₹850 to ₹2,800 | Design Cafe |
Spacewood says its figures cover cutting and basic finishing, and that denser patterns cost more because they take more machine time (Spacewood). Design Cafe's guide gives the MDF and marble rates (Design Cafe). For a whole door, NoBroker puts a CNC-cut panel with toughened glass behind it at ₹18,000 to ₹32,000.
Our guidance: MDF suits a dry flat; choose HDHMR, PVC or metal near a bathroom wall or in a damp coastal city. A glass backing keeps dust out but blocks airflow, so leave the top panel open.
HomeLane suggests frosted glass for privacy, and plain or decorated glass doors for apartments. Glass lets the lamp glow through.
NoBroker's guide, last updated in June 2026, gives these approximate costs per door, and says most of its designs use 8 to 10 mm toughened glass:
The guide does not say whether these include GST or fitting. If you are pricing the glass separately, decorative etched glass on IndiaMART is mostly listed between ₹75 and ₹500 per sq ft, depending on thickness, toughening and design (IndiaMART). One Hyderabad maker lists finished pooja room glass doors at ₹600 to ₹700 per sq ft (KGN Glass Designs on IndiaMART).
Ask for toughened glass in writing. Our guidance on motifs: a simple om, lotus or bell outline etched into the glass reads well from across a room, and keeps detailed images of deities for the shrine itself rather than a surface people push and knock.
Small brass bells on the shutters or the frame are one of the most searched details. They are cheap: IndiaMART's hanging bell listings run from about ₹90 to ₹520 a piece for small brass and door bells, with larger temple bells at ₹1,200 to ₹1,250 (IndiaMART).
Our guidance on fixing them:
In a flat the pooja room often opens off a passage or the dining area, so the floor in front of it is shared. A single hinged door on a 3 ft opening sweeps a quarter circle 3 ft deep. Houzz India suggests double-door shutters for small puja rooms so the full width of the mandir opens (Houzz India), and that also halves the swing.
Hinged panels that fold on a top track. Four panels, two each side, need the least floor of any hinged option. NoBroker prices foldable glass doors with two or four shutters at ₹18,000 to ₹35,000 and notes that hardware quality has a large effect on the cost. Folding door hardware sets on IndiaMART are mostly listed at ₹2,000 to ₹10,000, rated by panel weight (IndiaMART). Check the weight rating, especially for glass.
No swing at all, but the leaves need clear wall to park on, so a sliding door suits a pooja room on a long, empty wall. NoBroker gives ₹25,000 to ₹50,000 for sliding glass doors with decorative borders, with track quality and carving pushing the price up. Our sliding versus hinged wardrobe guide covers the same trade-offs in track and hardware.
Low leaves in wood, mild steel or brass bars keep toddlers and pets from the diya while the shrine stays in view, and block no air. We found no published price for half doors; price one as a wooden or jaali door of the same area.
Some families skip the door altogether. In this Raipur flat by Byoura Design Studio, the Nestle 602 project, the mandir sits in an arched alcove closed by tie-back linen curtains.
Our guidance: curtains are the cheapest and most breathable closure, but fabric burns. Tie them well back, as here, whenever a lamp is lit.
The budget option. Priced IndiaMART listings are mostly ₹1,500 to ₹5,000 a piece, in sizes such as 600 by 2050 mm (IndiaMART). A few show a few hundred rupees "per piece"; ask what that covers.
A closed pooja room holds a flame and incense. Houzz India says a puja room must have provision for windows and ventilation, and HomeLane says proper ventilation is needed. The door is the easiest place for it.
Our guidance for the door:
Our pooja room design guide covers safe distances for the flame and what research says about incense smoke.
Houzz India and HomeLane both give the same minimum doorway: at least 2 ft 6 in wide and 7 ft high. HomeLane adds that the door should open outward, so it does not disturb people seated inside.
Factory flush doors follow BIS modular designations such as 8 DS 20, 9 DS 21 and 12 DT 21 (D for door, S for a single shutter, T for a double-leaf shutter). We read the numbers as an opening of 800 to 1,200 mm by 2,000 or 2,100 mm. The same manual allows any other size as agreed between maker and buyer, which is how most custom pooja doors are made. Wooden pooja door listings on IndiaMART show heights of 80 to 84 inches and widths of 32 to 38 inches for single doors.
Small size: an opening narrower than 2 ft 6 in is usually a pooja unit with cabinet shutters; our apartment pooja guide covers unit sizes.
| Item | Published range | Unit |
|---|---|---|
| PVC pooja door, ready-made | ₹1,500 to ₹5,000 | per door |
| Wooden door, plain or lightly carved | ₹10,000 to ₹35,000 | per door |
| Deep-carved teak or rosewood door | ₹45,000 to ₹1,50,000 | per door |
| Glass door designs | ₹10,000 to ₹75,000 | per door |
| Wooden door, priced by area | mostly ₹260 to ₹2,800 | per sq ft |
| CNC jaali panel | ₹90 to ₹1,500 and up | per sq ft |
| Etched decorative glass | ₹75 to ₹500 | per sq ft |
| Brass hanging bells | ₹90 to ₹1,250, most under ₹520 | per bell |
| Folding or sliding hardware set | ₹2,000 to ₹10,000 | per set |
A fair quote names:
If the pooja door is part of a larger fit-out, our room-by-room interior cost guide shows how carpentry is priced, and MOA's free home cost calculator gives a whole-home estimate.
Published prices in October 2026: ₹1,500 to ₹5,000 for PVC, ₹10,000 to ₹35,000 for most wooden doors, ₹10,000 to ₹75,000 for glass, and up to ₹1,50,000 for deep carving. Check what is included.
A four-panel bi-fold or a two-leaf sliding door takes the least floor. A double door with a jaali top halves the swing and lets smoke out.
NoBroker gives ₹10,000 to ₹24,000 for a single glass door, up to ₹75,000 for wood with art glass. One Hyderabad maker lists ₹600 to ₹700 per sq ft.
Outward, as HomeLane advises, so it does not hit anyone seated inside.
At least 2 ft 6 in wide and 7 ft high, per Houzz India and HomeLane.
Planning a pooja room door with the rest of your interiors? Find an interior designer on MOA, and filter the directory by your city.